This is an editorial, spec based look at a 160-piece self-drilling drywall anchor kit, written from what the Amazon listing describes rather than from any hands-on use. The goal is to explain what the kit actually is, what the listing claims, who it realistically suits, and where the honest limits sit, so you can decide whether it fits the job you have in mind before you buy. Nothing here is a lab result or a hands-on trial. It is a plain reading of the product details paired with how self-drilling anchors behave in general.
What it is
At its core this is a kit of self-drilling drywall anchors bundled with matching screws. Self-drilling anchors are the cone shaped, coarse threaded fasteners that twist straight into drywall without a separate pilot hole. You position the anchor, drive it in with a Phillips screwdriver or a drill until the head sits flush with the wall, then drive the included screw into the anchor to hang your hardware. The whole point of this style is speed and simplicity for hanging light to medium items on a hollow drywall surface where there is no stud directly behind the fixing point.
Because the kit pairs anchors with screws that are meant to fit them, you are not left guessing about thread match or screw length, which is a common frustration when you buy anchors and screws separately. The listing presents the set as heavy duty metal wall anchors for drywall and sheetrock, sized at roughly 0.47 by 1.18 inch, supplied as a no drill anchor and screw kit.
Key features per the listing
Here is what the Amazon listing states, kept as listing claims rather than verified measurements:
- 160 pieces total. The count covers both the anchors and their matching screws, so the usable number of hanging points is roughly half the headline figure once each anchor is paired with its screw.
- Self-drilling metal build. The listing describes these as heavy duty metal wall anchors, which means they are intended to twist into drywall under their own cutting threads with no pre-drilling.
- No pilot hole required. The self-drilling tip and coarse thread are designed to start and sink into drywall directly, which is the main time saver of this anchor style.
- Stated size around 0.47 by 1.18 inch. That is the listed diameter and length of the anchor body, a typical footprint for standard half inch and five eighths inch drywall.
- Phillips drive. Both the anchor and the screw take a standard Phillips bit, so no special tool is needed beyond a screwdriver or a drill with a Phillips attachment.
- Matched screws included. The screws are sized to seat in the anchors, so the set works as a self-contained kit rather than a loose bag of anchors.

160-Piece Self-Drilling Drywall Anchor Kit with Screws
A 160-piece kit of self-drilling metal drywall anchors with matching screws, sized about 0.47 by 1.18 inch per the listing, made to twist into drywall without a pilot hole.
Check price on AmazonA weight rating, where one is shown, is a manufacturer figure. Self-drilling anchors as a category are generally positioned for light to medium duty, and the number you see on any listing should be read as a claim rather than a guarantee for your specific wall.
Who it is for
This kit is aimed at the everyday indoor hanging jobs that fall between a thumbtack and a stud mount. Think framed pictures and artwork, small floating shelves, bathroom or hallway mirrors, towel bars, light decor, clocks, and similar items that land on drywall where there is no stud in the right spot. If you have ever gone to hang something and found only hollow drywall behind the mark, this is exactly the problem self-drilling anchors are meant to solve.
It also suits people who want a stocked drawer of ready to go fasteners. With a large piece count and screws already matched to the anchors, it is the kind of kit you keep on hand for repeat small jobs around a home or a rental rather than buying a fresh pack each time. It is less suited to anyone mounting heavy or safety critical loads, which belongs on a stud or on hardware rated for that weight.
Strengths on paper
Read against the listing, the appeal is straightforward. The self-drilling design removes the pilot hole step, so each anchor goes in quickly with just a screwdriver or drill, which keeps the job clean and fast. The large piece count gives clear bulk value for anyone who hangs things regularly, and keeping a supply in a drawer means fewer last minute trips for a single pack. The matched screws are a genuine convenience, since mismatched screw and anchor sizes are a frequent cause of loose, spinning anchors. Finally, the metal body described on the listing is, in principle, more resistant to snapping during install than the thin plastic ribbed anchors some kits ship with, though how a specific anchor performs always depends on drive technique and wall condition.
Things to check honestly
This is where a spec based review has to stay grounded. A few points are worth weighing before you rely on these:
- Weight ratings are a listing claim. The real safe load depends on your drywall thickness, its age and condition, and the direction of pull. An item that hangs flat against the wall behaves very differently from one that pulls outward or downward on the anchor.
- Heavy items belong on a stud or a toggle. For anything substantial, such as large mirrors, heavy shelving, or anything you would not want to fall, drive into a stud or step up to a toggle bolt. Self-drilling anchors are not the right tool for high loads.
- Not for ceilings, plaster, or masonry. These are for vertical drywall. Ceilings put a constant straight down pull on the fastener and need rated ceiling hardware, while plaster, brick, and concrete need anchors made for those materials.
- Do not overtighten. Driving an anchor or screw too hard can strip the drywall around it, leaving the anchor spinning in an enlarged hole that no longer grips. Stop as soon as the head sits flush and the fixing feels firm.
- Half the count is screws. Remember that the 160-piece figure includes the screws, so plan the number of actual hanging points accordingly.
How it compares
It helps to see where self-drilling anchors sit next to the other common drywall options, honestly framed on holding power rather than marketing.
Self-drilling anchors, like the ones in this kit, win on speed and ease. No pilot hole, quick install, good for light to medium items. Their holding power is the most modest of the three because everything relies on the drywall immediately around the threads.
Toggle bolts are the strongest of the common choices. A spring or strap toggle spreads the load across a wide bearing surface behind the drywall, so they hold far more weight and resist pull out much better. The trade off is that they need a larger pre-drilled hole and are more fiddly to install, and they are harder to remove cleanly.
Expansion anchors, including the plastic ribbed and self-tapping conical types, sit in the middle. They grip by flaring or wedging against the drywall as the screw drives in. They are inexpensive and simple, but can spin out if the hole gets enlarged, and their real strength still depends heavily on wall thickness.
The honest takeaway is that if the job is light to medium and convenient installation matters, self-drilling anchors are a sensible match. If the load is heavy or the consequence of a failure is high, move up to a toggle bolt or anchor into a stud instead.
Verdict
On paper, this 160-piece self-drilling drywall anchor kit reads as a practical, good value stock of fasteners for the common indoor hanging jobs that land on hollow drywall. The self-drilling design, Phillips drive, and matched screws make it easy to live with, and the bulk count suits anyone who hangs things often. The sensible expectations are the important part. Keep it to light and medium items, treat any weight figure as a listing claim, avoid ceilings and masonry, and reach for a stud or a toggle bolt when the load gets serious. Within those limits it is an easy kit to keep on hand. If it matches your use, you can view these drywall anchors on Amazon to check the current listing details.
Disclosure: This is an editorial, listing based review and not a hands-on evaluation. We have not used or physically handled this product. Features and specifications are claims drawn from the Amazon product listing and can change. As an Amazon Associate we may earn from qualifying purchases made through links on this page, at no extra cost to you.